Refreshing Terracotta Floor Tiles in Shropshire

This Mexican Terracotta tiled floor was installed throughout the kitchen, dining room, hallway and back porch of a house in the town of Wellington which is the third largest town in Shropshire. It was interesting to work with real handmade Mexican Terracotta tiles which I understand are left outside to dry in the sun, which would seem to be true as in some places you could see the tiles were marked by some animal footprints.

These particular Terracotta tiles were laid over a decade ago and now overdue a deep clean and re-seal, additionally the floor had suffered from a crack in the grout line near the doorway to the kitchen, so I quickly fixed that before making a start on a thorough clean and re-seal for the entire surface.

Cleaning Mexican Terracotta tiles

The previous sealer had worn away so to clean the floor I used a strong dilution of the high alkaline cleaner Tile Doctor Pro Clean. Under normal circumstances I would apply the solution to the tiles using a black scrubbing pad, but in this case I resolved to use a brush fitted to my rotary machine due to the Terracotta floor’s uneven surface. The solution really helped to lift out the dirt and stains, and the residue was extracted using a wet vacuum.

I then turned my attention to cleaning the grout, using the same Pro-Clean and water combination applied with a stiff grout brush. After giving the floor an initial rinse, I realised that there were a couple stubborn stains still remaining on the tiles. To remove these I used Tile Doctor Remove & Go, a powerful cleaner that is particularly effective at penetrating into porous stone like Terracotta to lift out deeply ingrained muck.

After completing the clean, I gave the floor another thorough rinse, before leaving the house for a week to give the area plenty of time to dry.

Sealing Mexican Terracotta tiles

Upon my return, my first task was to inspect the floor for dampness. It is always important to do this because any leftover moisture can potentially damage the performance of the sealer. Nonetheless, as expected, the floor was dry enough for the sealer to be applied.

I applied a total of nine coats of Tile Doctor Seal & Go, which provided the floor with a nice sheen finish and durable surface protection for the future. Seal & Go is suitable for use on internal, unsealed porous surfaces such as Terracotta, Sandstone, Slate, and more.

My client was extremely pleased with the results, and left the following comment on the Tile Doctor feedback system:

“Joe is a true professional. He was completely committed to doing the best job possible. Also, his manners were impeccable. A pleasure to have in the house.”
 
 
Source: Professional Tile, Stone and Grout cleaning services in Shropshire